DBI-SALA 100 ft. Rope Grab System Hands Free Capital Safety 5000401

Quickly set up a secure, mobile fall arrest system for tower climbing and other at-heights operations. The Rope Grab System Kit from DBI-SALA has everything you need to meet OSHA standards for fall protection in a vertical safety system.

The Rope Grab System is designed to offer continuous mobile fall protection. With speed-sensing inertia and cam-locking brakes, EZ Stop II shock absorbing lanyard, and overhead tie-off adapter all included, you can set it up easily and climb with confidence.

The 100 ft. DBI-SALA Rope Grab System meets or exceeds all related OSHA and ANSI standards including the stringent ANSI Z 359.

Whether your application is wind energy construction, tower climbing, cellphone engineering or tree care, the Rope Grab Kit from DBI-SALA provides a reliable and easy-to-use system.

• Inertia and cam-locking break mechanism
• Energy-absorbing 5/8 in. diameter mobile rope grab
• Stainless steel hardware
• 100 ft. polyester/polypropylene blended line with snap hook
• Flexible counterweight to keep the lifeline steady

The Rope Grab System brings all the pieces you need for vertical climbing safety together. They are made by the same company (DBI-SALA) and are made to fit together. The Rope Grab System will provide you with great value over time because it is going to operate without problems for years to come.

Attach the lifeline to a suitable anchorage point, or create one with the tie-off adapter. Open the rope guide by removing the detent pin, hook it up to the polyester/polypropylene lifeline (don’t worry, this has a gravity latch system that won’t allow you to install it upside down) and then lock the rope grab onto the rope.

Hook the EZ Stop II shock-absorbing lanyard to the dorsal D-ring on your full body harness (not included) and to the rope grab, and you are ready to get to work safely.

For more information on the proper deployment of the Rope Grab System, see attached Rope Grab System manual. With the system attached, you will be safely the entire vertical length of the lifeline.

• 5/8 in. diameter Rope Grab with inertia and cam-locking cleats
• 100 ft. of polyester/polypropylene lifeline with snap hook
• 3 ft. EZ Stop II shock-absorbing lanyard
• Anchorage tie-off, polyester webbing, 3 ft.
• Flexible counterweight
• System carry bag

DBI-SALA Rope Grab Technical Information

Mobile rope system, automatic rope grab, window washer fall protection, vertical fall protection, lifeline system

5000401 - Complete 100 ft. Rope Grab Kit
5000335 - Rope Grab
1202844 - 100 ft. Polyester/Polypropylene Lifeline
5901583 - Flexible Counterweight
1240007 - 3 ft. Shock Absorbing Lanyard
1003000 - Tie-Off Adapter
9503806 - Carry Bag